All tire manufacturers are stepping up the development of products that can extend tire life, improve fuel economy and reduce automobile exhaust emissions. Therefore, consumers are acquiring many types of cutting-edge tires, such as silicon based tires and low rolling resistance tires. However, as an end user, if you do not maintain the correct tire pressure, you will not be able to obtain the maximum benefit from these technologies. Therefore, you should know how to use the tire charger correctly.
It is important to check the tyre pressure level of the vehicle every two weeks. Most people follow this rule, but some don’t. Most drivers go to tire stores or gas stations to do this work, so they are not worried about checking the air pressure regularly. However, it is easy to purchase a portable electronic tire charger. It is easy to operate the portable digital tire charger. The device can prevent accidents such as tire burst or insufficient air.
How to use the tire charger?
At the initial stage, the air plug must be connected to the electrical outlet. Most injectors have power cords that can be extended close to a single wheel. When using the tire charger, you need to keep the vehicle’s engine running, which effectively prevents the car battery from running out.
Before performing the task, you should check the condition of the tires. Do not inflate the tire if a large tire burst is found. In this case, the spare tire can be replaced. You can also call for better help.
If the tire pressure is slightly low or leaks late, you can use a tire charger. To inflate the tire, the nozzle of the compressor must be accurately connected to the valve stem of the tire. Before switching on the compressor pump, make sure that all connections are correct.
Now, open the air intake device, and the compressed air can enter the tire. This process should be carried out with caution. If you hear a hissing sound, you should turn off the charger. If the connection is wrong, it will make a hissing sound. Therefore, the valve connections and nozzles can be retightened correctly. If the connection is not correct, the environment in the system may leak.
The atmospheric pressure shall be stopped and confirmed regularly with a pressure gauge to prevent excessive expansion. You should also check the recommended air pressure of the car. It can be found in the owner’s manual of the vehicle or on the signboard on the driver’s doorpost.
It takes about 2-3 minutes to inflate a fully charged tire. However, if the tire does not have enough air, the work can be completed within 40-50 seconds. After the tire is inflated, the compressor nozzle shall discharge safely. Do not disconnect until the injector is closed.
